Fidgeting is a common habit, and for good reason. It helps us focus and relax. But what if there was a way to fidget without having to rely on traditional methods like joint rolling or clicking? Enter DIY fidget rings. These rings are made from materials that you probably have around the house—like plastic spoons, chopsticks, and even toothpicks. All you need are some basic tools and some patience, and you’re good to go. be sure to check out our comprehensive guide on how to make your own.
How to Make the Fidget Rings
There’s no need to spend money on fidget rings when you can make your own out of some inexpensive materials. All you need are a few simple tools and some time. Here’s how to make your own DIY fidget rings:
1. Get a set of metal cutting pliers.
2. Cut two circles out of a piece of metal that is about the size of your finger. The circles should be about 1 inch in diameter and 1/4 inch thick.
3. Make small cuts around the edge of each circle so that they can be easily opened up like a book.
4. Place one of the circles onto a flat surface, such as a table top, and place the other circle on top of it. Make sure that the edges of the circles are lined up evenly so that they form a complete ring shape.
5. Use the pliers to gently squeeze the edges together until they form a tight seal. Be careful not to crush or damage the metal!
6. Repeat steps 4-5 with the other circle, and then use superglue or another strong adhesive to securely attach each ring together. If desired, you can also add decorative elements, such as spikes or dangles, using needle nose pliers or a DIY jewelry making tool kit (like this one). Enjoy your new DIY fidget rings!
What to Do with the Fidget Rings After You Make Them
If you’re like most people, you probably got your hands on a fidget ring at some point and loved the way it helped keep you calm and focused. If you’re looking to make your own DIY fidget rings, there are a few things to take into account first.
The basic principle behind making your own fidget spinner is the same as for any other type of DIY project – start by measuring the size of ring you want to make and then cutting out the desired shape from some thin plastic or wood. Once you have your template cut out, use a hot glue gun or another type of adhesive to attach the ring to the template. You can use different colors or styles of adhesive to add more personality to your ring.
Once your template is complete, it’s time to start spinning! To do this, put one end of the toy into your mouth and hold onto the other end with both hands. Start spinning around quickly in one direction and then switch directions quickly. Be sure to keep up the speed until you feel confident that you can spin the toy indefinitely without losing balance or control.
What You’ll Need
If you’re looking for a fun, unique way to keep your hands busy during those long lectures or boring meetings, then check out these DIY fidget rings! They’re super easy to make, and they’ll keep you entertained for hours on end. All you need are some basic supplies: some wire, a ring shape (like a band), some small beads, and hot glue.
Step 1: Start by cutting the wire into desired lengths. I recommend around 18 inches for average-sized hands.
Step 2: Bend the ends of the wire into a loop shape and hot glue them together near one end. Make sure that the loop is large enough to fit over your finger comfortably.
Step 3: Next, add some small beads to the other end of the loop. This will serve as your fidgeting mechanism. You can add as many or as few beads as you’d like, but I recommend starting with just two or three in order to get a feel for how it feels.
Step 4: Finally, attaching the ring part should be simple enough. Just slip it over your fingers and hot glue it in place around the loop portion of the wire. Enjoy!
How to Make the Rings
In this tutorial, we will be teaching you how to make your own DIY fidget rings. Fidget rings are a great way to help focus and anxiety-free during busy times. If you’re unfamiliar with what a fidget ring is, it is a simple toy that consists of a metal loop with small bumps on one or both sides. When you twist the metal loop, the bumps create resistance which helps to keep you entertained and focused.
Before beginning this tutorial, you will need: -1 circular piece of metal -Needle nose pliers -Wire cutters or hobby saw -Sandpaper -Ruler or measuring tape -E-6000 glue or superglue -6-8 small gold or silver balls (optional)
The first step is to measure out your circular piece of metal. You will need to make it slightly smaller than the size of your desired fidget ring. Once you have measured out your metal, use the needle nose pliers to curl the metal around itself so that it forms a loop. Make sure that the end of the metal loop is nice and tight so that it doesn’t come loose.
Next, take your wire cutters or hobby saw and cut off one end of the metal loop. Make sure that the end is slightly rounded so that it doesn’t hurt your fingers when you try to play with your fidget ring later on. Next, use E-6000 glue or superglue to attach the end of the
Tips for Making Your Fidget Rings Last Longer
There are a few things you can do to help your DIY fidget rings last longer. First, make sure they’re properly cleaned and stored. Second, avoid exposing them to extreme heat or cold. Finally, be aware of the different types of materials that can affect how long your fidget rings will last.
Conclusion
If you’re looking for a fun and engaging way to keep your fingers busy, then DIY fidget rings are definitely the way to go. By making your own fidget rings, you can control how bored you get and tailor the toy to your specific needs. We’ve outlined the steps involved in making your very own fidget ring, so be sure to give it a try if boredom is starting to get the best of you!
